New Digital 4-20mA 0-10V Voltage Signal Generator 0-20mA Current Transmitter

Description

elecbuy
Home
Description
Payment
Shipping
Terms of sale
About Us
New Digital 4-20mA 0-10V Voltage Signal Generator 0-20mA Current Transmitter
Note:
for the air mail can’t ship battery, this list not include the battery,
Recommended 3.7V lithium battery, thickness less than 8mm, XH2.54 2pin connector
Features:
3 power supply modes:
DC15-30V/USB-5V/Lithium battery (not included);
Voltage and current regulation can be switched with one button, independent wiring, and simultaneous output;
Current output 2, 3, 4 wire passive, active fully compatible, can be connected to analog passive 2-wire pressure sensor, temperature sensor; can also be connected to active 3, 4-wire PLC, inverter, servo drive, flow Valve, etc.;
The output is short-circuit protected and the power supply is reverse-protected;
Multiple output ranges: 0-3.3/5/10/2-10/1-5…0-20/0-22/4-20m…
Multiple display modes: voltage and current/100.0% percentage/50.0H…
Coarse adjustment and double adjustment mode, the adjustment number of turns can be set;
Encoder knob 360 degree stepless adjustment, stable and durable
4-digit high-definition digital tube, two decimal points are adjusted with high precision, and the output can be calibrated;
Pluggable terminal block, easy to install and carry;
Power supply modes
DC15V-30V external power supply, can share 24V power supply of PLC and other equipment;
Android (microUSB) universal interface, can be connected to charging treasure / charger / electricity
Brain USB port, etc.;
3.7V lithium battery power supply (this list not include battery);
Specification:
External power supply DC15-30V power 1W (not charging) / 5W (charging);
External microUSB- 5V current 0.2A (no charge) / 1A (charge);
Voltage output 0-10V adjustable, accuracy O.01V calibrated, maximum current 100mA, short circuit protection;
The current output is adjustable from 0-22mA, the accuracy is 0.01mA, the current sampling resistor is 10-500 ohms, and it can be short-circuited.
The digital tube displays 4 digits, two decimal places;
Encoder knob 1 pulse number 20
Package include:
1 x 0-10V 0-22mA Signal Generator 24V Current Voltage Transmitter Signal Simulation
New Products:
Payment
We accept PayPal only.
Shipping
1.Items are shipped from china.we will send out within 1 bussiness day after receive the payment.
2.We only ship to ebay confirmed address. So before bidding,  please kindly verify your ebay address.
3.
Shipping to USA takes 8-18 days in normal condition by E-packet with tracking number.
Shipping to most other countries takes about 12-30 days via Economy Int’l Airmail.
Less than $40, without free tracking number,if you request tracking number,please send ebay message to us.
Over $40,with tracking number free.The shipping time depends on your location and local postal service,as well as the weather condition along the shipping,sometimes may take longer,.please send ebay message to us if you didn’t get your package.
4.Express shipping: Extra $20 –$25 will be charged for the first 500 grams for most countries. Send ebay message to us if  you need this service.
Terms of sale
1.If you are not satisfied when you receive your item, please return it within 30 days for a replacement or money back.   Please send ebay message to us before you return it.
2.If item is defective in 30 days, We will send you a replacement without extra charger, or offer refund after we receive the defective item.
3.If item is defective after 30 days, you can still send it back to us. We will send you a new one after receiving the defective item. But you have to pay the extra shipping fee.
About us
We are honest seller and do our best to serve you.
So if you have any concerns,please don’t hesitate to send ebay message to us.